GF Separation type tubular centrifuge is a high speed separation equipment, mainly used to separate two immiscible liquids with different specific gravity, the liquid may contain a small amount of solid or no solid. Continuous liquid inlet and outlet, the separated solids cannot be discharged automatically, and need to be taken out manually after shutdown.
GF Separation type tubular centrifuge is a high speed separation equipment, mainly used to separate two immiscible liquids with different specific gravity, the liquid may contain a small amount of solid or no solid. Continuous liquid inlet and outlet, the separated solids cannot be discharged automatically, and need to be taken out manually after shutdown.
The liquid entering the drum rotates at high speed under the drive of the high-speed rotating drum and forms a centrifugal force field. Under the action of the centrifugal force field, the non-homogeneous liquid is layered, with the liquid phase outside the inner cavity of the drum and the solid phase in the center of the inner cavity of the drum. As the nozzle continuously sprays the liquid, the liquid is separated into three phases of liquid and solid when it is retained in the inner cavity of the drum. The liquid phase with a higher specific gravity forms an outer ring and flows out from the heavy liquid port of the liquid collecting plate, and the liquid phase with a lower specific gravity forms an inner ring and is discharged from the light liquid port of the liquid collecting plate. The solids in the liquid are deposited on the wall of the drum and are manually unloaded after the machine is shut down.
The tubular centrifuge is mainly composed of body parts, transmission parts, main shaft transmission parts, tension wheel parts, liquid collection tray parts, drum parts, and liquid inlet bearing seat parts.
1.The housing has two shapes: square and round.
2.The housing surface is wrapped with 304 stainless steel.
3.The parts in contact with the suspension are made of SS304 stainless steel. 316L material can also be provided as needed.
4.The housing body adopts an open door design to facilitate the disassembly and assembly of the drum, reduce labor intensity, and do not affect the separation effect.
GF separation type tubular centrifuge is mainly used to separate various difficult-to-separate emulsions in industry, especially suitable for liquid-liquid separation with very small relative gravity difference and liquid-liquid-solid three-phase separation containing a small amount of impurities.
Main uses: For example, transformer oil, turbine oil, lubricating oil, fuel oil, dyes, grease, saponification, various micro-powder materials, purification of Span-80 liquid, various oral liquids, various liquid medicines, separation of "920": separation of plasma biological drugs and extraction of plasma from animal blood: edible oil, Caipan soaking liquid, tea polyphenols, refining of soybean concentrated lecithin, oil-water separation and sewage treatment, etc.
Tubular centrifuges are widely used for separation of plasma and blood cells from chicken, pig, cattle, sheep and other blood. They can be used to prepare plasma (blood cell) protein powder, albumin, hemoglobin, thrombin, SOD, etc., and can also be used to make serum products such as bovine serum albumin. This centrifuge is also suitable for oil-water separation of various animals and plants, such as sea buckthorn oil, coconut oil, avocado oil, olive oil, pepper oil, chicken oil or bone broth, etc., and can also be used for the recycling and treatment of waste oil, lubricating oil, cutting fluid, etc. generated by machinery.
Tubular centrifuges can also choose different configurations according to different customer requirements
1) Body form: rotating body / open door body / closed door body
2) Body appearance: spray paint / stainless steel package
3) Frequency conversion control cabinet, using frequency converter to start, adjustable speed, reduce starting current, reduce the degree of damage to transmission parts and wear parts, and increase the service life of equipment and motors.
4)According to the field of use, explosion-proof type and nitrogen protection, as well as cooling type with cooling coils can be provided.
5) A mobile integrated base is available
| Model Item | GF45 | GF75 | GF105 | GF115 | GF125 | GF150 | |
| bowl | Diameter(mm) | 42 | 75 | 105 | 114 | 125 | 142 |
| Speed(r/m) | 28000 | 19000 | 16300 | 16300 | 15000 | 14000 | |
| Volume(L) | 0.36 | 2.2 | 6 | 7 | 8 | 10 | |
| Separation factor(w2r/g) | 18440 | 15200 | 15620 | 17000 | 15700 | 15580 | |
| Maximum throughput based on water(L/H) | 100 | 600 | 1200 | 1300 | 1500 | 2500 | |
| Motor(KW) | 0.55 | 1.5 | 2.2 | 3 | 3 | 3 | |
| Weight(KG) | 90 | 260 | 500 | 520 | 530 | 550 | |
| Dimension (mm×mm×mm) |
480x460x800 | 760×450×1120 | 850×550×1600 | 900x550x1600 | 900×550×1600 | 900×600×1600 | |
